Share:


RH-5064-66 VANGUARD INORGANIC QUARTZ 9H SIO2 FLUORO INORGANIC CRYSTALS COATING

RM265.90



High inorganic silicon: the formed coating contained over 76% of inorganic silicon.  Easy to solidify for high intensive coating.
High Hardness: hardness of coating can go up to 7-9H for effective physical protection and against external force may cause paint damage.
High Brightness: Colorless, Transparent Coating. Crystal clear. Bright and Smooth surface of the coating with certain coverage.  Fully reflect the brilliant shine without produce diffraction.
Safety: Safety has been considered when design the product formula. Coating will not crack. Solidify process is slower at the beginning and dry faster after. The solidify process is slower than other similar products but easy to wipe clean. The solidify process will be effected by air, temperature and humidity. Therefore before applying, please test on small paint area for experiment to determine the wipe off time. Do not water within two hours’ time. The coating will be fully solidifying in about two days. Wash car after one week (theoretically one week, but can be washed after two days but still try to avoid)
Please refer to the temperature and the wipe off timetable for application.
 
High water repellency: the coating contains Fusso, low on contacting surface. The hydrophilic solid (contacting angle)can be more than 120 °, the average often at 110°. Hydrophobic result is obvious. After the Crystal glass coating the water beads up will gradually get effective, it will be obvious after 2 hours when applied.
Good stability: Good chemical bonding stability and insoluble with strong acid or alkali or organic solvent. Can resist almost all kinds of chemical etching, also against such as oxidation, acid rain, UV ray, grease, bird droppings and other general road pollution.
Longer lasting: As the coating is stabilized and chemically loss will not occurred. It means the coating will be permanently stays on for about 3 years or more. But some of the Fusso water repellency effect will be reduce somehow. So strong water repellency will maintained for about 6 months, and general water repellency will still be there. Therefore, recommended to have maintenance every 6 months to have better strong water repellency result.
Can be used individually for car paint, windshield or plastic parts.
Three types of coating can be used individually or in combination. After apply coating Plastic parts & Car paint Coating, then add the Glass Coating on top to have a thickness coating layer with strong and exaggerated water repellency.
Glass Coating can also be treated as maintenance use for SiO2 Fluoro Crystal Coating.
 
Wash the car: clean the car thoroughly.
Remove stains: Use stain remover to get rid of dirt and asphalt and clean the car.
Remove brake dust: use the brake dust remover to solute some part of carbon or brake dust and wash clean. Then use the clay to thoroughly clean the particle residue and clean the car.
Polish: Polish the car paint, suggested to use the polishing wax. If there is ot stain remover or brak


 Inquiry - RH-5064-66 VANGUARD INORGANIC QUARTZ 9H SIO2 FLUORO INORGANIC CRYSTALS COATING